SONY DCR-PC103E l'instruction d'utilisation télécharger (Page 265 de 316)

Les langues: Français encore 1
  • Anglais
Pages:316
Sur le site, vous pouvez voir la version complète du document et le télécharger en format PDF.
Page 265 de 316
265
Troubleshooting
Dépannage
5-digit display
Cause and/or Corrective Actions
• You are using a battery pack that is not an “InfoLITHIUM”
battery pack.
c
Use an “InfoLITHIUM” battery pack (p. 25, 285).
• Moisture condensation has occurred.
c
Eject the cassette and leave your camcorder for at least
1 hour to acclimatise (p. 292).
• The video heads are dirty.
c
Clean the heads using the cleaning cassette (optional)
(p. 293).
• A malfunction other than the above that you can service has
occurred.
c
Eject the cassette and insert it again, then operate your
camcorder. Do not perform this operation if moisture starts
to condense (p. 292).
c
Disconnect the mains lead of the AC Adaptor or remove the
battery pack. After reconnecting the power source, operate
your camcorder.
c
Replace the cassette.
• A malfunction that you cannot service has occurred.
c
Contact your Sony dealer or local authorised Sony service
facility and inform them of the 5-digit code. (e.g., E:61:10)
If you are unable to rectify the problem even if you try corrective actions a few times, contact your
Sony dealer or local authorised Sony service facility.
Your camcorder has a self-diagnosis display function.
This function displays the current condition of your
camcorder as a 5-digit code (a combination of a letter
and numbers) on the LCD screen or viewfinder. If a 5-
digit code appears, check the following code chart. The
last 2 digits (indicated by
ss
) will differ depending on
the state of your camcorder.
LCD screen or Viewfinder
Self-diagnosis display
•C:
ss
:
ss
You can service your camcorder
yourself.
•E:
ss
:
ss
Contact your Sony dealer or local
authorised Sony service facility.
C:04:
ss
C:21:
ss
C:22:
ss
C:31:
ss
C:32:
ss
E:20:
ss
E:61:
ss
E:62:
ss
E:91:
ss
English
Self-diagnosis display
C:21:00
Sample